Okay

Per a few emails back I asked about full mesh and it was determined or
re certified to not be a great idea, especially when one scales, and
it's apparently not needed at any point.

So I've tried to get my 4 box system to drop some of this activity.

Master
Slave
QSLAVE1
QSLAVE2

I've tried to remove any events from taking place from 3 to 4 and vice
versa. I still want the master and slave to talk to both QSlaves (a
bit nervous I guess about removing Slave to Qslave communications)
(since there will be occasions for switchover).

I'm still seeing on Slave1 the following (slave 1 is node 3, slave 2 is node 4)

2008-05-29 10:22:02 PDT DEBUG2 remoteWorkerThread_1: SYNC 5318 done in
0.011 seconds
2008-05-29 10:22:02 PDT DEBUG2 remoteWorkerThread_1: forward confirm
4,4775 received by 1
2008-05-29 10:22:02 PDT DEBUG2 remoteWorkerThread_1: forward confirm
4,4775 received by 2
2008-05-29 10:22:02 PDT DEBUG2 remoteWorkerThread_1: forward confirm
3,6219 received by 4
2008-05-29 10:22:02 PDT DEBUG2 remoteWorkerThread_1: forward confirm
2,4937 received by 4
2008-05-29 10:22:02 PDT DEBUG2 remoteWorkerThread_1: forward confirm
3,6219 received by 2
2008-05-29 10:22:02 PDT DEBUG2 remoteWorkerThread_1: forward confirm
3,6219 received by 1
2008-05-29 10:22:02 PDT DEBUG2 remoteWorkerThread_1: forward confirm
1,5318 received by 2
2008-05-29 10:22:02 PDT DEBUG2 remoteWorkerThread_1: forward confirm
2,4937 received by 1

So it appears even though I show : sl_path=10, sl_listen=26

That I've not correctly or successfully removed some of the chatter
between the nodes.

So, where would I have assigned these paths? We have looked thru our
scripts and cannot locate where we may be setting this and thus need
to remove it.  sl_path seems right, sl_listen not so sure about.

Thanks
Tory