4.3. Monitoring

4.3.1. test_slony_state

This invaluable script does various sorts of analysis of the state of a Slony-I cluster. Some administrators recommend running these scripts frequently (hourly seems suitable) to find problems as early as possible.

You specify arguments including database, host, user, cluster, password, and port to connect to any of the nodes on a cluster. You also specify a mailprog command (which should be a program equivalent to Unix mailx) and a recipient of email.

You may alternatively specify database connection parameters via the environment variables used by libpq, e.g. - using PGPORT, PGDATABASE, PGUSER, PGSERVICE, and such.

The script then rummages through sl_path to find all of the nodes in the cluster, and the DSNs to allow it to, in turn, connect to each of them.

For each node, the script examines the state of things, including such things as:

• Checking sl_listen for some "analytically determinable" problems. It lists paths that are not covered.

• Providing a summary of events by origin node

  If a node hasn't submitted any events in a while, that likely suggests a problem.

• Summarizes the "aging" of table sl_confirm

  If one or another of the nodes in the cluster hasn't reported back recently, that tends to lead to cleanups of tables like sl_log_1, sl_log_2 and sl_seqlog not taking place.

• Summarizes what transactions have been running for a long time

  This only works properly if the statistics collector is configured to collect command strings, as controlled by the option stats_command_string = true in postgresql.conf .

  If you have broken applications that hold connections open, this will find them.

  If you have broken applications that hold connections open, that has several unsalutory effects as described in the FAQ.

The script does some diagnosis work based on parameters in the script; if you don't like the values, pick your favorites!

4.3.2. Nagios Replication Checks

The script in the tools directory called psql_replication_check.pl represents some of the best answers arrived at in attempts to build replication tests to plug into the Nagios system monitoring tool.

A former script, test_slony_replication.pl, took a "clever" approach where a "test script" is periodically run, which rummages through the Slony-I configuration to find origin and subscribers, injects a change, and watches for its propagation through the system. It had two problems:

• Connectivity problems to the single host where the test ran would make it look as though replication was destroyed. Overall, this monitoring approach has been fragile to numerous error conditions.

• Nagios has no ability to benefit from the "cleverness" of automatically exploring the set of nodes. You need to set up a Nagios monitoring rule for each and every node being monitored.

The new script, psql_replication_check.pl, takes the minimalist approach of assuming that the system is an online system that sees regular "traffic," so that you can define a view specifically for the replication test called replication_status which is expected to see regular updates. The view simply looks for the youngest "transaction" on the node, and lists its timestamp, age, and some bit of application information that might seem useful to see.

• In an inventory system, that might be the order number for the most recently processed order.

• In a domain registry, that might be the name of the most recently created domain.

An instance of the script will need to be run for each node that is to be monitored; that is the way Nagios works.

4.3.3. Monitoring Slony-I using MRTG

One user reported on the Slony-I mailing list how to configure mrtg - Multi Router Traffic Grapher to monitor Slony-I replication.

... Since I use mrtg to graph data from multiple servers I use snmp (net-snmp to be exact). On database server, I added the following line to snmpd configuration:

exec replicationLagTime  /cvs/scripts/snmpReplicationLagTime.sh 2
where  /cvs/scripts/snmpReplicationLagTime.sh looks like this:

#!/bin/bash
/home/pgdba/work/bin/psql -U pgdba -h 127.0.0.1 -p 5800 -d _DBNAME_ -qAt -c
"select cast(extract(epoch from st_lag_time) as int8) FROM _irr.sl_status
WHERE st_received = $1"

Then, in mrtg configuration, add this target:

Target[db_replication_lagtime]:extOutput.3&extOutput.3:public at db::30:::
MaxBytes[db_replication_lagtime]: 400000000
Title[db_replication_lagtime]: db: replication lag time
PageTop[db_replication_lagtime]: <H1>db: replication lag time</H1>
Options[db_replication_lagtime]: gauge,nopercent,growright

Alternatively, Ismail Yenigul points out how he managed to monitor slony using MRTG without installing SNMPD.

Here is the mrtg configuration

Target[db_replication_lagtime]:`/bin/snmpReplicationLagTime.sh 2`
MaxBytes[db_replication_lagtime]: 400000000
Title[db_replication_lagtime]: db: replication lag time
PageTop[db_replication_lagtime]: <H1>db: replication lag time</H1>
Options[db_replication_lagtime]: gauge,nopercent,growright

and here is the modified version of the script

# cat /bin/snmpReplicationLagTime.sh
#!/bin/bash

output=`/usr/bin/psql -U slony -h 192.168.1.1 -d endersysecm -qAt -c
"select cast(extract(epoch from st_lag_time) as int8) FROM _mycluster.sl_status WHERE st_received = $1"`
echo $output
echo $output
echo
echo
# end of script#

4.3.4. Bucardo-related Monitoring

The Bucardo replication system includes script, check_postgres.pl, which can monitor a variety of things about PostgreSQL status that includes monitoring Slony-I replication status; see check_postgres.pl - slony_status

4.3.5. search-logs.sh

This script is constructed to search for Slony-I log files at a given path (LOGHOME), based both on the naming conventions used by the Section 5.1.4 and Section 5.1.1.21 systems used for launching slon processes.

Errors, if found, are listed, by log file, and emailed to the specified user (LOGRECIPIENT); if no email address is specified, output goes to standard output.

LOGTIMESTAMP allows overriding what hour to evaluate (rather than the last hour).

An administrator might run this script once an hour to monitor for replication problems.

4.3.6. Building MediaWiki Cluster Summary

The script mkmediawiki.pl , in tools, may be used to generate a cluster summary compatible with the popular MediaWiki software. Note that the --categories permits the user to specify a set of (comma-delimited) categories with which to associate the output. If you have a series of Slony-I clusters, passing in the option --categories=slony1 leads to the MediaWiki instance generating a category page listing all Slony-I clusters so categorized on the wiki.

The gentle user might use the script as follows:

~/logtail.en>         mvs login -d mywiki.example.info -u "Chris Browne" -p `cat ~/.wikipass` -w wiki/index.php
Doing login with host: logtail and lang: en
~/logtail.en> perl $SLONYHOME/tools/mkmediawiki.pl --host localhost --database slonyregress1 --cluster slony_regress1 --categories=Slony-I  > Slony_replication.wiki
~/logtail.en> mvs commit -m "More sophisticated generated Slony-I cluster docs" Slony_replication.wiki
Doing commit Slony_replication.wiki with host: logtail and lang: en

Note that mvs is a client written in Perl; on Debian GNU/Linux, the relevant package is called libwww-mediawiki-client-perl; other systems may have a packaged version of this under some similar name.

4.3.7. Analysis of a SYNC

The following is (as of 2.0) an extract from the slon log for node #2 in a run of "test1" from the regression tests.

DEBUG2 remoteWorkerThread_1: SYNC 19 processing
INFO   about to monitor_subscriber_query - pulling big actionid list 134885072
INFO   remoteWorkerThread_1: syncing set 1 with 4 table(s) from provider 1
DEBUG2  ssy_action_list length: 0
DEBUG2 remoteWorkerThread_1: current local log_status is 0
DEBUG2 remoteWorkerThread_1_1: current remote log_status = 0
DEBUG1 remoteHelperThread_1_1: 0.028 seconds delay for first row
DEBUG1 remoteHelperThread_1_1: 0.978 seconds until close cursor
INFO   remoteHelperThread_1_1: inserts=144 updates=1084 deletes=0
INFO   remoteWorkerThread_1: sync_helper timing:  pqexec (s/count)- provider 0.063/6 - subscriber 0.000/6
INFO   remoteWorkerThread_1: sync_helper timing:  large tuples 0.315/288
DEBUG2 remoteWorkerThread_1: cleanup
INFO   remoteWorkerThread_1: SYNC 19 done in 1.272 seconds
INFO   remoteWorkerThread_1: SYNC 19 sync_event timing:  pqexec (s/count)- provider 0.001/1 - subscriber 0.004/1 - IUD 0.972/248

Here are some notes to interpret this output:

• Note the line that indicates

  inserts=144 updates=1084 deletes=0

  This indicates how many tuples were affected by this particular SYNC.

• Note the line indicating

  0.028 seconds delay for first row

  This indicates the time it took for the

  LOG
  cursor

  to get to the point of processing the first row of data. Normally, this takes a long time if the SYNC is a large one, and one requiring sorting of a sizable result set.

• Note the line indicating

  0.978 seconds until
  close cursor

  This indicates how long processing took against the provider.

• sync_helper timing: large tuples 0.315/288

  This breaks off, as a separate item, the number of large tuples (e.g. - where size exceeded the configuration parameter sync_max_rowsize) and where the tuples had to be processed individually.

• SYNC 19 done in 1.272 seconds

  This indicates that it took 1.272 seconds, in total, to process this set of SYNCs.

• SYNC 19 sync_event timing:  pqexec (s/count)- provider 0.001/1 - subscriber 0.004/0 - IUD 0.972/248

  This records information about how many queries were issued against providers and subscribers in function sync_event(), and how long they took.

  Note that 248 does not match against the numbers of inserts, updates, and deletes, described earlier, as I/U/D requests are clustered into groups of queries that are submitted via a single pqexec() call on the subscriber.

• sync_helper timing:  pqexec (s/count)- provider 0.063/6 - subscriber 0.000/6

  This records information about how many queries were issued against providers and subscribers in function sync_helper(), and how long they took.